Network ip printer
Manual IP Setting through Control Panel<br /><br />On the control panel, press OK.<br />Use the arrow buttons to select Network config., and then press OK.<br />Use the arrow buttons to select CFG TCP/IP, and then press OK.<br />Use the arrow buttons to select BOOTP, make sure the value is No, and then press OK.<br />Use the arrow buttons to select DHCP, make sure the value is No, and then press OK.<br />Use the arrow buttons to select IP BYTE 1, and then press OK.<br />Use the arrow buttons to change the value of IP BYTE 1, and then press OK.<br />Repeat steps 6 and 7 for IP BYTE 2, IP BYTE 3, and IP BYTE 4. Also, repeat steps 6 and 7 for the Subnet Mask (SM BYTE 1, SM BYTE 2, SM BYTE 3, SM BYTE 4 ) and Default Gateway (GW BYTE 1, GW BYTE 2, GW BYTE 3, GW BYTE 4).<br />NOTE: Example: If the IP address is 192.168.0.1<br />IP byte 1=192<br />byte 2=168<br />byte 3 =0<br />byte 4 =1<br />Use the Back or Cancel button to leave the Network config. menu.<br />Settings will take effect after Step 9 and the printer has returned to Ready.